cc13
New Member
Posts โข 105
Likes โข 164
November 2021
|
Mr Jago - Spore 1 (released Tue 6th December), by cc13 on Dec 6, 2022 14:58:08 GMT 1, Managed to get one - just lucky I was literally staring at my inbox when the email arrived as Iโd completely forgotten about it!
Managed to get one - just lucky I was literally staring at my inbox when the email arrived as Iโd completely forgotten about it!
|
|
thisisthesam
New Member
Posts โข 482
Likes โข 435
August 2014
|
Mr Jago - Spore 1 (released Tue 6th December), by thisisthesam on Dec 6, 2022 14:58:20 GMT 1, Deckled edge means float mounted. Black or white frame though...?
Also do these ship flat?
Deckled edge means float mounted. Black or white frame though...?
Also do these ship flat?
|
|
andthony
New Member
Posts โข 7
Likes โข 0
May 2021
|
Mr Jago - Spore 1 (released Tue 6th December), by andthony on Dec 6, 2022 15:11:37 GMT 1, Got one ๐
Got one ๐
|
|
Slim Jim 999
New Member
Posts โข 72
Likes โข 30
August 2019
|
Mr Jago - Spore 1 (released Tue 6th December), by Slim Jim 999 on Dec 6, 2022 15:43:10 GMT 1, Got one!
Got one!
|
|
Slim Jim 999
New Member
Posts โข 72
Likes โข 30
August 2019
|
Mr Jago - Spore 1 (released Tue 6th December), by Slim Jim 999 on Dec 6, 2022 15:43:21 GMT 1, Got one!
Got one!
|
|
|
Mr Jago - Spore 1 (released Tue 6th December), by its all about me on Dec 6, 2022 16:23:45 GMT 1, How quickly did these sell out? I took a break from staring at my computer screen...and missed the drop.
How quickly did these sell out? I took a break from staring at my computer screen...and missed the drop.
|
|
|
Artsy 1
New Member
Posts โข 33
Likes โข 17
June 2021
|
Mr Jago - Spore 1 (released Tue 6th December), by Artsy 1 on Dec 6, 2022 17:12:04 GMT 1, About 4/5 minutes
About 4/5 minutes
|
|
chazawalla
New Member
Posts โข 56
Likes โข 36
October 2022
|
Mr Jago - Spore 1 (released Tue 6th December), by chazawalla on Dec 6, 2022 19:15:28 GMT 1, Within 10 minutes for sure. I was 5 minutes late seeing the email but was able to secure one.
Within 10 minutes for sure. I was 5 minutes late seeing the email but was able to secure one.
|
|
Acme Thunderer
Junior Member
Posts โข 2,960
Likes โข 5,527
June 2011
|
Mr Jago - Spore 1 (released Tue 6th December), by Acme Thunderer on Dec 6, 2022 20:10:16 GMT 1, Iโm glad to see other members on here were able to get one. I nearly regretted starting this thread in case it reduced my chancesโฆ but I got one as well. ๐
This is a mock-up of how mine will look once framed.
Iโm glad to see other members on here were able to get one. I nearly regretted starting this thread in case it reduced my chancesโฆ but I got one as well. ๐ This is a mock-up of how mine will look once framed.
|
|
thisisthesam
New Member
Posts โข 482
Likes โข 435
August 2014
|
Mr Jago - Spore 1 (released Tue 6th December), by thisisthesam on Dec 6, 2022 20:18:06 GMT 1, Iโm glad to see other members on here were able to get one. I nearly regretted starting this thread in case it reduced my chancesโฆ but I got one as well. ๐ This is a mock-up of how mine will look once framed.
Very nice - are you float mounting it to the very edge? I'm thinking black frame as the white border feels like there will be lots of space on top of white frame?
Iโm glad to see other members on here were able to get one. I nearly regretted starting this thread in case it reduced my chancesโฆ but I got one as well. ๐ This is a mock-up of how mine will look once framed. Very nice - are you float mounting it to the very edge? I'm thinking black frame as the white border feels like there will be lots of space on top of white frame?
|
|
Acme Thunderer
Junior Member
Posts โข 2,960
Likes โข 5,527
June 2011
|
Mr Jago - Spore 1 (released Tue 6th December), by Acme Thunderer on Dec 6, 2022 20:24:30 GMT 1, Iโm glad to see other members on here were able to get one. I nearly regretted starting this thread in case it reduced my chancesโฆ but I got one as well. ๐ This is a mock-up of how mine will look once framed. Very nice - are you float mounting it to the very edge? I'm thinking black frame as the white border feels like there will be lots of space on top of white frame? I like what you done with my mock up - good to see the variations. ๐
I normally go for black frames. With this, I am framing without a mount so going right to the edge of the paper and having spacers like Iโve got with my Beejoir. There is enough of a white border on the print already so will look right in a chunky 4cm white frame.
Iโm glad to see other members on here were able to get one. I nearly regretted starting this thread in case it reduced my chancesโฆ but I got one as well. ๐ This is a mock-up of how mine will look once framed. Very nice - are you float mounting it to the very edge? I'm thinking black frame as the white border feels like there will be lots of space on top of white frame? I like what you done with my mock up - good to see the variations. ๐ I normally go for black frames. With this, I am framing without a mount so going right to the edge of the paper and having spacers like Iโve got with my Beejoir. There is enough of a white border on the print already so will look right in a chunky 4cm white frame.
|
|
tranito
New Member
Posts โข 245
Likes โข 159
February 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by tranito on Dec 6, 2022 21:22:54 GMT 1, Beauty of a print. Can't wait to see it in person. Tough call between a black or a white frame. Love both mock-ups.
Beauty of a print. Can't wait to see it in person. Tough call between a black or a white frame. Love both mock-ups.
|
|
thisisthesam
New Member
Posts โข 482
Likes โข 435
August 2014
|
Mr Jago - Spore 1 (released Tue 6th December), by thisisthesam on Dec 6, 2022 21:58:41 GMT 1, Beauty of a print. Can't wait to see it in person. Tough call between a black or a white frame. Love both mock-ups. I'll be waiting for the first person to frame theirs haha! I can't wait to see it in person... 26 colours!
I've never had a deckled print before but assume you always float mount it rather than box to box.
Thin black looks gorgeous...
Beauty of a print. Can't wait to see it in person. Tough call between a black or a white frame. Love both mock-ups. I'll be waiting for the first person to frame theirs haha! I can't wait to see it in person... 26 colours! I've never had a deckled print before but assume you always float mount it rather than box to box. Thin black looks gorgeous...
|
|
The Rat King
New Member
Posts โข 675
Likes โข 420
September 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by The Rat King on Dec 6, 2022 22:17:27 GMT 1, Black suffocates it go white imo
Black suffocates it go white imo
|
|
|
chazawalla
New Member
Posts โข 56
Likes โข 36
October 2022
|
Mr Jago - Spore 1 (released Tue 6th December), by chazawalla on Dec 6, 2022 22:37:54 GMT 1, I wonder what a black or off-black backing board would look like with black frame? If doing a black frame I think you'd have to nail the white backing to match the paper (otherwise it starts to look like rings around the print IMO) which is tough to do.
I'll probably just mount it with a matboard. Asymmetric paper borders drive me nuts and I'm not about to cut that bottom 1/2" off lol (or is there a rule against hiding deckled edges??)
I wonder what a black or off-black backing board would look like with black frame? If doing a black frame I think you'd have to nail the white backing to match the paper (otherwise it starts to look like rings around the print IMO) which is tough to do.
I'll probably just mount it with a matboard. Asymmetric paper borders drive me nuts and I'm not about to cut that bottom 1/2" off lol (or is there a rule against hiding deckled edges??)
|
|
Acme Thunderer
Junior Member
Posts โข 2,960
Likes โข 5,527
June 2011
|
Mr Jago - Spore 1 (released Tue 6th December), by Acme Thunderer on Dec 6, 2022 22:43:46 GMT 1, I wonder what a black or off-black backing board would look like with black frame? If doing a black frame I think you'd have to nail the white backing to match the paper (otherwise it starts to look like rings around the print IMO) which is tough to do. I'll probably just mount it with a matboard. Asymmetric paper borders drive me nuts and I'm not about to cut that bottom 1/2" off lol (or is there a rule against hiding deckled edges??) Prints not under a mount can go wavy after time so I would always prefer a flat print. Itโs all down to personal preference as some people prefer float mounted.
I wonder what a black or off-black backing board would look like with black frame? If doing a black frame I think you'd have to nail the white backing to match the paper (otherwise it starts to look like rings around the print IMO) which is tough to do. I'll probably just mount it with a matboard. Asymmetric paper borders drive me nuts and I'm not about to cut that bottom 1/2" off lol (or is there a rule against hiding deckled edges??) Prints not under a mount can go wavy after time so I would always prefer a flat print. Itโs all down to personal preference as some people prefer float mounted.
|
|
chazawalla
New Member
Posts โข 56
Likes โข 36
October 2022
|
Mr Jago - Spore 1 (released Tue 6th December), by chazawalla on Dec 6, 2022 22:51:56 GMT 1, ^^ Good point, I'm actually dealing with this on a cheapo Etsy print right now. Is it common to tape the bottom of the print or just hang off the top?
I really like what this guy did - might try to emulate it on this one: urbanartassociation.com/post/1995024
^^ Good point, I'm actually dealing with this on a cheapo Etsy print right now. Is it common to tape the bottom of the print or just hang off the top? I really like what this guy did - might try to emulate it on this one: urbanartassociation.com/post/1995024
|
|
njr911
Junior Member
Posts โข 2,365
Likes โข 402
April 2007
|
Mr Jago - Spore 1 (released Tue 6th December), by njr911 on Dec 7, 2022 10:06:27 GMT 1, Missed it. Annoying!
Missed it. Annoying!
|
|
chazawalla
New Member
Posts โข 56
Likes โข 36
October 2022
|
Mr Jago - Spore 1 (released Tue 6th December), by chazawalla on Dec 7, 2022 14:56:08 GMT 1, Shipped email already, should be here Monday (now thats impressive for Canada)
Shipped email already, should be here Monday (now thats impressive for Canada)
|
|
Slim Jim 999
New Member
Posts โข 72
Likes โข 30
August 2019
|
Mr Jago - Spore 1 (released Tue 6th December), by Slim Jim 999 on Dec 8, 2022 16:18:15 GMT 1, Mines arrived today!
Mines arrived today!
|
|
thisisthesam
New Member
Posts โข 482
Likes โข 435
August 2014
|
Mr Jago - Spore 1 (released Tue 6th December), by thisisthesam on Dec 8, 2022 17:52:11 GMT 1, Does float mounting something like this leave ripples along the bottom? Prefer a flat print...
Does float mounting something like this leave ripples along the bottom? Prefer a flat print...
|
|
tranito
New Member
Posts โข 245
Likes โข 159
February 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by tranito on Dec 8, 2022 19:41:52 GMT 1, I don't think framing method (float mounting vs. under mat) is the reason for waves/ripples. It only let it shows (float mounting) or tries to hide it under a mat. The combination of the type of paper with the printing process will, in the end, have the final word on if a print edition ends up staying super flat or if the paper starts making some waves/ripples. It's kind of hard to predict from my experience. I have some floated prints that stayed super flat, others show waviness. Your best bet is to store the print flat for a little while (6 months to a year). If after that time, your print doesn't show signs of waviness, you're probably good to go with float mounting. If it made waves/ripples and you find it annoying, then frame it under a mat to hide it as much as possible..
I don't think framing method (float mounting vs. under mat) is the reason for waves/ripples. It only let it shows (float mounting) or tries to hide it under a mat. The combination of the type of paper with the printing process will, in the end, have the final word on if a print edition ends up staying super flat or if the paper starts making some waves/ripples. It's kind of hard to predict from my experience. I have some floated prints that stayed super flat, others show waviness. Your best bet is to store the print flat for a little while (6 months to a year). If after that time, your print doesn't show signs of waviness, you're probably good to go with float mounting. If it made waves/ripples and you find it annoying, then frame it under a mat to hide it as much as possible..
|
|
|
partart
New Member
Posts โข 107
Likes โข 14
February 2021
|
Mr Jago - Spore 1 (released Tue 6th December), by partart on Dec 9, 2022 14:42:41 GMT 1, Mine delivered today! Can't wait to open it when home. First Jago!
Thanks for the framing inspiration.
Mine delivered today! Can't wait to open it when home. First Jago!
Thanks for the framing inspiration.
|
|
abroughy
New Member
Posts โข 3
Likes โข 1
May 2021
|
Mr Jago - Spore 1 (released Tue 6th December), by abroughy on Dec 9, 2022 14:56:55 GMT 1, Asked a friend to buy me one of these incase I missed it. We have both managed to get one, so looking to sell one if anyone is interested.
Collection in Bristol or I can post.
Asked a friend to buy me one of these incase I missed it. We have both managed to get one, so looking to sell one if anyone is interested.
Collection in Bristol or I can post.
|
|
tranito
New Member
Posts โข 245
Likes โข 159
February 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by tranito on Dec 13, 2022 20:24:57 GMT 1, It's amazing the craft and care that goes in the process of making such a print, yet when it's time to ship them, they don't even bother to put some kraft paper around it for protection.
It's amazing the craft and care that goes in the process of making such a print, yet when it's time to ship them, they don't even bother to put some kraft paper around it for protection.
|
|
nobokov
Junior Member
Posts โข 4,873
Likes โข 6,786
February 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by nobokov on Dec 13, 2022 20:42:31 GMT 1, Bastards. Least they could do to provide the materials I'll need when I flip it.
Bastards. Least they could do to provide the materials I'll need when I flip it.
|
|
chazawalla
New Member
Posts โข 56
Likes โข 36
October 2022
|
Mr Jago - Spore 1 (released Tue 6th December), by chazawalla on Dec 15, 2022 23:54:43 GMT 1, Mine was packed just fine
Anybody framed one yet?
Mine was packed just fine Anybody framed one yet?
|
|
tranito
New Member
Posts โข 245
Likes โข 159
February 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by tranito on Dec 16, 2022 1:07:31 GMT 1, You had kraft paper?!? Or do you mean that rolling a print in tissue paper is fine packaging?
You had kraft paper?!? Or do you mean that rolling a print in tissue paper is fine packaging?
|
|
chazawalla
New Member
Posts โข 56
Likes โข 36
October 2022
|
Mr Jago - Spore 1 (released Tue 6th December), by chazawalla on Dec 16, 2022 1:27:06 GMT 1, No kraft paper but it was wrapped in a pretty generous amount of glassine and felt safe to me. Maybe I'm being too generous lol.
No kraft paper but it was wrapped in a pretty generous amount of glassine and felt safe to me. Maybe I'm being too generous lol.
|
|
tranito
New Member
Posts โข 245
Likes โข 159
February 2016
|
Mr Jago - Spore 1 (released Tue 6th December), by tranito on Dec 16, 2022 1:32:01 GMT 1, Bastards. Least they could do to provide the materials I'll need when I flip it. Oh the sarcasm. Such finesse. I just thought an expertly crafted 26 color ยฃ450 print (+ยฃ60 for shipping) deserved to be packed safely and professionally so that they can land in their new homes all around the globe unscathed. The tube used was extra thick and strong, I'll give 'em that.
Bastards. Least they could do to provide the materials I'll need when I flip it. Oh the sarcasm. Such finesse. I just thought an expertly crafted 26 color ยฃ450 print (+ยฃ60 for shipping) deserved to be packed safely and professionally so that they can land in their new homes all around the globe unscathed. The tube used was extra thick and strong, I'll give 'em that.
|
|